miniClima [Product: EBC: Air Distribution Boxes (Optional Accessory)]

deutsch << www.miniclima.com >> english
- - -
[ Home & News • Product • References • FAQ • Company & Contact • Links ]

miniClima Constant Humidity Devices "EBC"

- - - Topics
EBC Homepage
Introduction & Version History
Features
Build Up In Principle
Types & Options
Description
Air Circulation Filter "FLT" (Optional Feature)
2.0l Bottle "2LF" (Optional Feature)
Air Distribution Boxes "LVB" (Optional Accessory)
Technical Data
Maintenance & Care
- - -

Air Distribution Boxes "LVB" (Optional Accessory) (Current Series EBC10/11)

The air-distribution-boxes are optional accessories (extra charge) thought for use with the miniClima EBC Master Sets EBC10 and -11. They offer the possibility to connect one single EBC unit to up to six showcases. Two sizes of boxes are available: A smaller box for EBC10 and a bigger one for EBC11. Two same-sized boxes are necessary for each device (air inlet/air outlet).

Additionally delivered items: Two boxes (one for the air inlet, one for the air outlet), adequate hosepipes and screw connections.

Requirements & Important Notes

The air-distribution-boxes can be used at circumstances where a sufficiently equal airflow will be given for all showcases. Essential requirements for this to reach are:

That all showcases are of virtually equal sizes and shapes, made of the same materials, and are of an equal air- and steam-tightness.
That all showcases are exposed to the same ambient conditions (i.e. same location, same heat load etc.).
That it is planned that all cases connected to the one device shall be brought to the same humidity level.

All showcases will be controlled by one EBC alone, thus there is no possibility to set different RH levels for the different cases. Furthermore the RH/T sensor of the miniClima device will have to be placed in just one of the several showcases. The data provided by this sensor will then be used as a reference for all cases, hence the above-mentioned requirements.

The maximum air volume (=the sum of all cases connected to the device) to be processed by the one device will be reduced as compared to the capacity of the device when it is used for one showcase alone. The reduction depends mainly on the number of showcases connected to the device and on the overall length of the used hoses.

When using the boxes the usually necessary diameter of the boreholes in the showcase walls changes as follows (as compared to the direct connection between device and case): EBC10: 20mm instead of 25mm; EBC11: 25mm instead of 32mm. Due to the necessity of equal lengths for some of the hosepipes it has to be calculated with an increased need of space to be able to house the hoses.

- - - Continue with
Technical Data
- - -

- - - Return to
Top of this page
Previous page
- - -